Fujian zhichuan mechanical equipment Co., Ltd.
Fujian zhichuan mechanical equipment Co., Ltd.
Add to Cart
Product Description:
Advantages and features of Danfoss motors
Energy-saving and power performance
Adopting advanced electromagnetic induction technology, the operating efficiency is as high as 95%, the power factor is significantly optimized, and energy loss and equipment heating are reduced.
Excellent low-speed stability, the power per unit weight far exceeds similar products, the short-term overload capacity is outstanding, and the output torque can reach 2700 Nm, which can meet the needs of high-load scenarios.
Diverse models and compact design
More than 1,600 models are available, with a displacement covering 8–800 cm³/r and a speed range of 250–2500 rpm, which are suitable for the precision control needs of different industrial scenarios.
The cycloidal motor is small in size and light in weight, saving 50% of the installation space compared with similar products, especially suitable for engineering machinery and hand tools with limited space.
High reliability and durability
The quantitative axial piston motor (such as the MP1 series) adopts a wear-free pilot valve design, supports high-frequency operation, has a life of tens of thousands of hours, and a failure rate lower than the industry standard.
The sealing material is highly corrosion-resistant, and the shaft seal design can withstand high back pressure, which is suitable for harsh working conditions such as dust and moisture.
Environmentally friendly and low-noise operation
The operating noise is ≤65 dB, the vibration amplitude is small, it meets the green manufacturing standards, and is suitable for medical equipment, food processing and other environmentally sensitive scenes.
Precautions for use
Selection and installation specifications
The selection needs to comprehensively consider the system pressure (up to 350 bar), flow requirements and torque range to avoid performance degradation caused by over-displacement or over-speed operation.
During installation, it is necessary to ensure that the coaxiality deviation between the motor spindle and the drive shaft is ≤0.1 mm to avoid abnormal bearing wear caused by eccentric load.
Media management and operation monitoring
The hydraulic oil needs to be pre-treated with a 5 μm precision filter, the viscosity range is 15–1000 cSt, and the oil acid value is regularly tested to prevent seal aging.
Monitor the oil temperature during operation (recommended ≤80°C), and abnormal temperature rise needs to check the load matching or cooling system effectiveness.
Maintenance and Fault Prevention
Check the bearing lubrication status every 500 hours and add high-temperature resistant grease; replace the shaft seal assembly every 2000 hours to prevent medium leakage.
If the motor is not used for a long time, the internal hydraulic oil needs to be drained and anti-rust oil should be applied to key components to avoid static corrosion.
Adaptation to special working conditions
Fluororubber reinforced seals are preferred in high-temperature environments, and heat sinks are installed; it is recommended to perform anti-corrosion coating maintenance every quarter in corrosive media scenarios.
A buffer valve needs to be configured in frequent forward and reverse rotation scenarios to reduce the risk of damage to the internal distribution structure caused by hydraulic shock.
With the above characteristics and specifications, Danfoss motors can be widely used in engineering machinery, mining equipment, automated production lines and other fields, taking into account efficient power output and long-term stable operation.
| Length | 100mm |
| Number Of Poles | 2 |
| Voltage | 12V |
| Speed | 5000 rpm |
| Stock | Available |
| Geometric Displacement | 410.9 cm³ (25.07 in³) |
| Model | MS08-MSE08 |
| Manufacturer | ABC Motors |
| Processing Customization | yes |
| Shaft Type | Round |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.